FÜLLSTÖP
“Flexible Water Proofing Cementitious Coating”
DESCRIPTION:
FÜLLSTÖP is a one component for project; and two components for retail available for water based high solids, elastomeric, acrylic co-polymer resin coating. It is an advanced technology used for waterproofing and Crystalline based Protective membrane. After an application of FÜLLSTÖP, it becomes a waterproof, elastomeric seal in the form of monolithic uniform membrane, & Active Chemicals in the Coatings Penetrate deep to the substrates which Crystallize the soluble salts to insoluble needle crystals.
USES:
FÜLLSTÖP is used for waterproofing properties to building envelopes like Industrial factory roofing, basement, parking concrete, building roofs, terraces, electronic exchange-building roofs, cold storages, asbestoses, exterior walls, and other surfaces.
| ADVANTAGES : |
 |
Waterproofing properties keeps building Maintenance-Free for Longer. |
|
It is vibration resistant. Will not crack due to minor movements in the building structures. |
|
Outstanding elongation properties. |
|
An excellent adhesion bond tenaciously to porous as well as sound UV resistant that keeps building’s aesthetic appearance for longer time. |
|
High durable, retains properties in climatic extremes. |
|
Non-toxic. |
|
Easy to apply. |
APPLICATIONS: MIXING RATIO :
After Surface Preparation, Mix “FÜLLSTÖP “COMPONENT–A” & “COMPONENT–B” of the pack as per required applications in the following Mixing Ratio.
TANK, TERRACE, SLABS ETC… :
| FIRST COAT | |
| Component A | 1 Part by Volume |
| Component B | 4 Parts by Volume |
| Water | 3 Parts by Volume |
Steer it consistently for 5 Minutes
Apply it By Brush to the Entire Substrate.
| MAIN COAT | |
| Component A | 1 Part by Volume |
| Component B | 4 Parts by Volume |
| Water | 1 Parts by Volume |
Steer it consistently for 5 Minutes
Apply it By Brush to the Entire Substrate. If Surface is too old, go for Second ‘Main Coat’ Application After 2-3 hours of above Applications.
WALLS AT BASEMENT/NAGATIVE SIDE :
| MORTAR POINTING AT BRICKS | |
| Component A | 1 Parts by Volume |
| Cement + Sand (1:3) | 20 Parts by Volume |
| Water | 5 Part by Volume |
| FIRST COAT | |
| Component A | 1 Part by Volume |
| Component B | 4 Parts by Volume |
| Water | 4 Parts by Volume |
Steer it consistently for 5 Minutes
Apply it By Brush to the Entire Substrate.
| MAIN COAT | |
| Component A | 1 Part by Volume |
| Component B | 4 Parts by Volume |
| Water | 2 Parts by Volume |
CURING :
FÜLLSTÖP surfaces do not required any external curing
COVERAGE :
Approx. 150 Sq. Ft.per 35 Kgs. Kit, For 2 coats of application, depending upon porosity and texture of the substrate.
COMPOSITION AND MATERIALS :
FÜLLSTÖP is a Two Pack System, Available for Unique Latest Technology Which Match Perfectly to the Cement Chemistry. “Component A” Contains High-Tech Modified Acrylic Polymers Liquid which consists of water- based high solids elastomeric poly acrylic resin, proprietary Elastomeric materials. “Component B” Contains Modified Polymer Powder, Grey P.P.C. & proprietary Chemicals Additives.
PACKAGING AND STORAGE :
FÜLLSTÖP is packaged in Two Pack System 35 kgs pack.
(Component A – 5 Kgs., Component B – 30 Kgs.,)
