POLYMIX-PLUS

“Multipurpose Polymer Admixture”

DESCRIPTION :
POLYMIX-PLUS is a single component; water based high solids, Milky White, acrylic Polymer Modified Specially for Portland Cement Compositions. It is an advanced technology used for both as waterproofing and Repairing Of Concrete Patchwork, Creaks, & Also used as Water Reducing, High Bonding Cement Admix, After an application of POLYMIX-PLUS, it becomes a Full Strength, Water Proof, elastomeric seal in the form of monolithic uniform membrane, which protects from UV rays & aging.

polymix plus

USES :
POLYMIX-PLUS is used for waterproofing, Repairing Of Concrete & Cracks, Vatas, Steel-Corrosions, Cement Admix for Water Reducing & High Bonding, Grouting,backing Coat to porous stones (i.e. marble granites) backside to protect from surface moisture & so many Applications. water proofing properties to building envelopes like Industrial factory roofing, concrete, building roofs, terraces, electronic exchange building roofs, exterior walls, and other Recommended surfaces.

ADVANTAGES :
Reduces Shrinkage, Cracking and Freeze-thaw damage.
Waterproofing properties keeps building waterproof.
It Gives full Strength & Toughness to Cement Mortars For high durability.
Outstanding durability.
Excellent adhesion bonds tenaciously to porous as well as sound surfaces.
Keeps building’s aesthetic appearance for longer time.
High durable, retains properties in climatic extremes.
Non-toxic .
Easy to apply.

WATER PROOFING / BONDING COAT :
Prior to any applications of Repairing, Bonding Coat is require for bonding mortar to substrates. prepare bonding coat as per below.

Water Proofing Properties achieved with 2 coats of following ratio.

POLYMIX-PLUS 1 PART (by vol.)
WATER 2 PART (by vol.)
CEMENT+SAND (1:2PBV.) :4 PART (by vol.)

Apply Repair mortar immediately to the bonding coat before it dries. prepare Repair mortars as per below.

REPAIR MORTAR :
Small section :
POLYMIX-PLUS 0.1 Ltr.
CEMENT 1 Kgs.
SAND 3 Kgs.
Big section :
POLYMIX-PLUS 0.1 Ltr.
CEMENT 1 Kgs.
SAND 1.5 .Kgs.
5 – 6 mm AGGR. 2 Kgs.

COVERAGE :
20Sq. Ft. per Kg. For 10 mm. even thickness.

CURING :
External curing is not reqired but at the time of hot climate we recommend to cure with fog spray 3 times a day for three days.

GROUTING :
POLYMIX-PLUS 1 PART (by vol.)
WATER 4 PART (by vol.)
CEMENT As per requirement

Mix Uniformly to thin slurry. & Grout with pump under sufficient pressure head.

STONE / MARBLE PROTECTION :
POLYMIX-PLUS 1 PART (by vol.)
WATER 1 PART (by vol.)
WHITE / GRAY CEMENT As per requirement

ADMIX FOR CEMENT & CONCRETE :
1 to 5 Kgs. p 50 Kgs. of cement bag.

COMPOSITION AND MATERIALS :
POLYMIX-PLUS is a white colored Liquid consistency and flowing materials, which consist of water, based high solids elastomeric poly acrylic resin and proprietary Chemicals

PACKING :
POLYMIX-PLUS is packaged in 5 / 20 Kgs. pack.